Filter
Top Products
Provisioning Reference (WRP400)
ATA Administration Guide 224
C
Basic Wireless
Settings for
Primary Network
<WL_BASIC_SET
_1>
<WL_BASIC_SET_1>wl_net_mode,wl
_closed,wl_ssid</
WL_BASIC_SET_1>
wl_net_mode: Network mode; mixed,
b-only, g-only, or disabled
wl_closed: SSID broadcast status; 1
(disabled) or 0 (enabled)
wl_ssid: Wireless network name;
enter 1 to 32 ASCII characters
(backslash character not allowed)
To enable SSID-1 and specify the SSID
name: <WL_BASIC_SET_1> wl_net_mode
=g-only,wl_closed=0, wl_ssid=aaabbb</
WL_BASIC_SET_1>
To configure SSID-1 as a Wireless B
network: <WL_BASIC_SET_1>wl_net_
mode=b-only,wl_ssid= aaabbb</WL_
BASIC_SET_1>
To disable SSID-1: <WL_BASIC_SET_1>
wl_net_mode=disabled</WL_BASIC_
SET_1>
Basic Wireless
Settings for
Secondary or
Guest Network
<WL_BASIC_SET
_2>
<WL_BASIC_SET_2>wl1_net_mode_t
mp,wl1_closed,wl1_ssid,ap_isolation<
/WL_BASIC_SET_2>
IMPORTANT: The secondary network
can be enabled only when when
wl_net_mode is enabled for the
primary network.
wl1_net_mode_tmp: Network mode; 1
(enabled), 0 (disabled)
wl1_closed: SSID broadcast status; 1
(disabled) or 0 (enabled)
wl1_ssid: Wireless network name;
enter 1-32 ASCII characters
(backslash character not allowed)
ap_isolation: For Internet Only Access
(Guest Network); 1 (disabled) or 0
(enabled)
ctrl_ssid2: Allows Service Provider to
lock SSID2; when enabled, user will
not be able to configure SSID2 from
the device GUI; 1 (enabled) or 0
(disabled)
To enable SSID-2 and specify the SSID
name, with guest network: <WL_ BASIC_
SET_2>wl1_net_mode_tmp= 1,wl1_
closed=0,wl1_ssid= cccddd,
ap_isolation=1</WL_BASIC_ SET_2>
To disable SSID-2: <WL_BASIC_SET_2>
wl1_net_mode_tmp=0</WL_BASIC_
SET_2>
To enable SSID-2 guest network: <WL_
BASIC_SET_2>ap_isolation=1</WL_
BASIC_SET_2>
To prevent SSID-2 configuration from the
device GUI: <WL_BASIC_SET_2> ctrl_
ssid2=0</WL_BASIC_SET_2>
Feature/XML
Tag
Parameters Examples