Filter
Top Products
ATA Voice Field Reference
User page
ATA Administration Guide 218
B
Voice tab > User page >
Ring Settings section
Default Ring Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Hold Reminder
Ring
Ring pattern for reminder of a holding call when the phone
is on-hook.
The default is None.
Call Back Ring Ring pattern for call back notification.
The default is None.
Cfwd Ring Splash
Len
Duration of ring splash when a call is forwarded
(0 – 10.0s).
The default is 0.
Cblk Ring Splash
Len
Duration of ring splash when a call is blocked (0 – 10.0s).
The default is 0.
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s).
The default is .5.
VMWI Ring Policy The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
device indicating the status of the subscriber’s mail box. 3
settings are available:
• New VM Available—ring as long as there is 1 or more unread
voice mail
• New VM Becomes Available—ring when the number of
unread voice mail changes from 0 to non-zero
• New VM Arrives—ring when the number of unread voice
mail increases.
The default is New VM Available.