Filter
Top Products
ATA Voice Field Reference
Regional page
ATA Administration Guide 155
B
Block Last Act
Code
Blocks the last inbound call.
The default is *60.
Block Last Deact
Code
Cancels blocking of the last inbound call.
The default is *80.
Accept Last Act
Code
Accepts the last outbound call. It lets the call ring through
when do not disturb or call forwarding of all calls are
enabled.
The default is *64.
Accept Last Deact
Code
Cancels the code to accept the last outbound call.
The default is *84.
CW Act Code Enables call waiting on all calls.
The default is *56.
CW Deact Code Disables call waiting on all calls.
The default is *57.
CW Per Call Act
Code
Enables call waiting for the next call.
The default is *71.
CW Per Call Deact
Code
Disables call waiting for the next call.
The default is *70.
Block CID Act Code Blocks caller ID on all outbound calls.
The default is *67.
Block CID Deact
Code
Removes caller ID blocking on all outbound calls.
The default is *68.
Block CID Per Call
Act Code
Blocks caller ID on the next outbound call.
The default is *81.
Block CID Per Call
Deact Code
Removes caller ID blocking on the next inbound call.
The default is *82.
Block ANC Act
Code
Blocks all anonymous calls.
The default is *77.
Block ANC Deact
Code
Removes blocking of all anonymous calls.
The default is *87.