Filter
Top Products
Provisioning Reference (WRP400)
ATA Administration Guide 233
C
Port Range
Forwarding
<PORT_RANGE_
FOWARDING>
<PORT_RANGE_FORWARDING>forward
_single=name:on|off:both|tcp|udp:port
range start:port range end:ip</
PORT_RANGE_FORWARDING>
NOTE: To configure port forwarding,
you also should configure a DHCP
reservation for the designated server.
forward_port: Supports port forwarding
on a range of ports
name: Application name
on|off: 0n (Enabled or off (Disabled
both|tcp|udp: Selected protocol; tcp, udp,
or both
external-port: The external port number
internal-port: The internal port number
ip: The IP address of the PC running the
specific application.
To allow forwarding on two specified port
ranges: <PORT_RANGE_FORWARDING>
forward_port=prf1:on:tcp:555:666:18
</PORT_RANGE_FORWARDING>
<PORT_RANGE_FORWARDING>
forward_port=prf2:on:both:777:888:19</PORT_
RANGE_FORWARDING>
To delete all: <PORT_RANGE_FORWARDING>
</PORT_ RANGE_FORWARDING>
Port Range
Triggering
<PORT_RANGE_
TRIGGERING>
<PORT_RANGE_TRIGGERING>port_trigg
er=name:on|off:trigger start:trigger
end:forward start:forward end</
PORT_RANGE_TRIGGERING>
port_trigger: Supports port range
triggering
name: Application name
on|off: On (enabled) or Off (disabled)
trigger start:trigger end: Triggered range
forward star:forward end: Forwarded
range
To configure two port range triggers:
<PORT_RANGE_TRIGGERING>port_
trigger=prt1:on:111:222:333:444
</PORT_ RANGE_TRIGGERING>
<PORT_RANGE_TRIGGERING>port_
trigger=prt2:on:555:666:777:888
</PORT_ RANGE_TRIGGERING>
To delete all: <PORT_RANGE_TRIGGERING></
PORT_ RANGE_TRIGGERING>
VLAN
<WAN_VLAN>
<WAN_VLAN>wan_vlan_enable,wan_vla
n_id</WAN_VLAN>
wan_vlan_enable: VLAN status; 1
(enabled) 0 (disabled)
wan_vlan_id: VLAN ID number
To enable VLAN and specify the VLAN ID:
<WAN_VLAN>wan_vlan_enable=1,
wan_vlan_id=123</WAN_VLAN>
To disable VLAN: <WAN_VLAN>wan_
vlan_enable=0</WAN_VLAN>
Feature/XML
Tag
Parameters Examples