Filter
Top Products
ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide 205
B
Voice tab > PSTN Line page >
Ring Settings section
Voice tab > PSTN Line page >
FXO (PSTN) Timer Values (sec) section
VoIP User 1/2/3/4/
5/6/7/8 DP
Index of the dial plan in the dial plan pool to be used with
VoIP User 1.
The default is 1.
VoIP User 1/2/3/4/
5/6/7/8 Password
The password to be used with VoIP User 1. The user
assumes the identity of VoIP User 1 must therefore
compute the credentials using this password, or the INVITE
will be challenged with a 401 response
The default is blank.
Default Ring 1-8, Follow Line Cfg
VoIP Answer Delay Delay in seconds before auto-answering inbound VoIP calls
for the FXO account. The range is 0-255.
The default is 3.
PSTN Answer
Delay
Delay in seconds before auto-answering inbound PSTN
calls after the PSTN starts ringing. The range is 0-255.
The default is 16.
VoIP PIN Digit
Timeout
Timeout to wait for the 1
st
or subsequent PIN digits from a
VoIP caller. The range is 0-255.
The default is 10.
PSTN PIN Digit
Timeout
Timeout to wait for the 1
st
or subsequent PIN digits from a
PSTN caller. The range is 0-255.
The default is 10.