Filter
Top Products
Provisioning Reference (WRP400)
ATA Administration Guide 230
C
Fail Pattern:
<PPP_DEMAND>ppp_demand=1,ppp_
idletime= 66666</PPP_DEMAND>
<PPP_DEMAND>ppp_demand=0,ppp_
redialperiod=777</PPP_DEMAND>
<PPP_DEMAND>ppp_demand=1
</PPP_ DEMAND>
<PPP_DEMAND>ppp_demand=0
</PPP_ DEMAND>
<PPP_DEMAND>ppp_demand=1,ppp_
redialperiod=77</PPP_DEMAND>
<PPP_DEMAND>ppp_demand=0,ppp_
idletime= 666</PPP_DEMAND>
WAN Host
<WAN_HOST>
<WAN_HOST>wan_hostname=host_test,
wan_domain=domain</WAN_HOST>
wan_hostname: WAN hostname; enter
from 0 to 39 ASCII characters
wan_domain: WAN domain name; enter
from 0 to 63 ASCII characters
To specify a WAN hostname and WAN domain
name: <WAN_HOST> wan_
hostname=host_test,wan_domain=
domain_test</WAN_ HOST>
To specify a WAN hostname only: <WAN_
HOST>wan_hostname= host_test</
WAN_HOST>
To specify a WAN domain name only:
<WAN_HOST>wan_domain=domain_ test</
WAN_HOST>
WAN MTU
<WAN_MTU>
<WAN_MTU>mtu_enable</WAN_MTU>
mtu_enable: MTU mode; 0 (automatic) or
1 (manual)
wan_mtu: MTU size; if MTU mode is
manual, enter a numeral from 576 to 1500
NOTE: The default size depends on
the Internet Connection Type:
DHCP or Static IP: 1500
PPPoE: 1492
PPTP or L2TP: 1460
Telstra Cable: 1500
To enable MTU in Auto mode: <WAN_
MTU>mtu_enable=0</WAN_MTU>
To enable MTU in Manual mode and specify the
MTU size: <WAN_MTU> mtu_
enable=1,wan_mtu=888
</WAN_MTU>
To enable MTU in Manual mode without
specifying the MTU size: <WAN_MTU>
mtu_enable=1</WAN_ MTU>
Feature/XML
Tag
Parameters Examples