Filter
Top Products
Provisioning Reference (WRP400)
ATA Administration Guide 232
C
Single Port
Forwarding
<SINGLE_PORT_
FORWARDING>
<SINGLE_PORT_FORWARDING>forward
_single=name:on|off:both|tcp|udp:external
-port:internal-port:ip</
SINGLE_PORT_FORWARDING>
NOTE: To configure port forwarding,
you also should configure a DHCP
reservation for the designated server.
forward_single: Supports port forwarding
on the specified port
name: Application name; enter a name or
use the following names for standard
applications: FTP, Telnet,
SMTP,DNS,TFTP,Finger, HTTP, POP3,
NNTP
on|off: on (enabled) or off (disabled)
both|tcp|udp: Selected protocol; tcp, udp,
or both
external-port: The external port number
internal-port: The internal port number
ip: The IP address of the PC that should
receive the requests.
To forward FTP to 192.168.15.18:
<SINGLE_PORT_FORWARDING>forward_singl
e=FTP:on:tcp:21:21:18</SINGLE_
PORT_FORWARDING>
To configure port forwarding for a non-standard
application: <SINGLE_PORT_
FORWARDING>forward_single=fw1:on:
both:1111: 2222:28</SINGLE_PORT_
FORWARDING>
To delete all: <SINGLE_PORT_FORWARDING>
</SINGLE_PORT_FORWARDING>
To configure port forwarding for default
standard applications such as FTP, Telnet, SMTP,
and others: <SINGLE_PORT_ FORWARDING>
forward_single=FTP:on: tcp:21:21:18
</SINGLE_PORT_ FORWARDING>
<SINGLE_PORT_FORWARDING>
forward_single=Telnet:on:tcp:23:23:19</
SINGLE_ PORT_FORWARDING>
Feature/XML
Tag
Parameters Examples