Filter
Top Products
ATA Voice Field Reference
Info page
ATA Administration Guide 129
B
Voice tab > Info page >
Trunk Status section (SPA8000)
VoIP Call Decode
Latency
Number of milliseconds for decoder latency.
VoIP Call Jitter Number of milliseconds for receiver jitter.
VoIP Call Round
Trip Delay
Number of milliseconds for delay.
VoIP Call Packets
Lost
Number of packets lost.
VoIP Call Packet
Error
Number of invalid packets received.
VoIP Call Mapped
RTP Port
The port mapped for Real Time Protocol traffic for Call 1/2.
Registration State Indicates if the line has registered with the SIP proxy.
Last Registration At Last date and time the line was registered.
Next Registration In Number of seconds before the next registration renewal.
Message Waiting Indicates whether you have new voice mail waiting.
Options are either Yes or No. This value is updated when
voice mail notification is received. You can also manually
modify it to clear or set the flag. Setting this value to Yes
can activate stutter tone and VMWI signal. This parameter
is stored in long term memory and survives after reboot or
power cycle.
Mapped SIP Port Port number of the SIP port mapped by NAT.