Toshiba DK424I Telephone User Manual


 
System & Station
Program 04 Station Logical Port [PDN] Assignment
Strata DK Programming 5/00 3-17
System & Station
Program 04 Example
Action (press buttons+LED buttons) LCD Response
1. Use an LCD programming phone per Minimum Hardware
Requirements in Chapter 1 - Overview.
No. N-N
1
Jan 20 Sun 06:43
1. N-N = program telephone [PDN]
2. 
Enter programming mode. (Do not press the [DN] button.)
Program Mode
3. 6SNU6SHDNHU+ROG
Access Program 04. The speaker beeps to indicate when to enter a
program number.
Program = 04
Data Store
4. 6SNU6SHDNHU
Prepare the system for a selection.
04 Select =
5. a
Select a port number (use three digits plus #).
04 Select = 000
INT = N-N
6. ;;;;
Enter the ports station number (up to four digits) from the record
sheet.
Note Station numbers must not exceed four digits, or conflict with
feature access codes listed in Program 05 record sheet.
04 Select = 000 ~239
INT = XXXX
7. +ROG
Secure data in system programming.
04 Select = (000~335)
Data Programmed
8. 6SNU6SHDNHU
Prepare the system for another selection (go back to Step 5) or
continue with Step 9.
04 Select =
9. +ROG
Secure Program 04 data in system memory.
00 Select = ##
Data Programmed
10. 6SNU6SHDNHU
Exit Program 04 (system beeps). Enter another program number or
continue with Step 11.
Program =
11. +ROG
Exit programming mode.
No. N-N
Jan 20 Sun 06:58