Filter
Top Products
E911
Program *11-5 – CAMA Digits Sent on 911 Calls
8-8 Strata DK Programming 5/00
Program *11-5 – CAMA Digits Sent on 911 Calls
Processor Type: DK40i, all RCTUs and BCUs (Release 4.3)
Program Type: System
Initialized Default: 911
Program *11-5 Overview
This program specifies which digits (“911” or “11” or “1”) will be sent to the to CAMA trunk,
when a user dials 911 or 9+911.
When a caller dials 911, the DK can send 911, 11, or 1 out the CAMA trunk before sending the
CESID location digits set in Program *12. Normally it is required to send 911, but this will vary so
you must check with the CAMA trunk provider to identify what to enter into this program. Digits
sent on the CAMA trunk are multi-frequency (MF) tones, so they cannot be checked with a DTMF
test set.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
X (choose 1) CAMA Digits Sent
911
11
1
CAMA digits sent if user dials 911 (911, 11, 1)
Use LED button 01 to blank out 9 or 91
SELECT = 5