Filter
Top Products
ISDN
ISDN
Guidelines for Programming ISDN Calling Features
Strata DK Programming 5/00 7-9
Programming for ISDN PRI LDN Type Call
The following table shows the minimum programming needed to make Listed Directory Number
(LDN)-type ISDN PRI calls work in the Strata DK System.
71-1 000 XXXX
This tells the system to route the incoming DNIS call that was route to DNIS
address 000 to Station Port XXXX.
Table 7-4 ISDN PRI LDN Type Call Programming
Program
Number
Program Data Description
03 XX 79 “XX” is the DK slot where the RPTU PCB is placed.
10-4 LED 9 On
LDN registration will route the unknown number or call type in numbering
plan.
*
16 XX 2 This tells the system that trunk group XX is an ISDN PRI Trunk Group.
*
42 1 XX 1
This tells the system to make the ISDN PRI Span the Primary Clocking
Source for the DK System. XX equals the slot in the DK system where the
RPTU PCB is placed, and to look at circuit (1).
*
43-1 1 24
This tells the system that the D-Channel on the 1st ISDN PRI Span is the
24th channel on the PRI Span.
*
63-2 04
This tells the system how long to wait to collect digits from station users
making a ISDN PRI Call before sending it to the network.
*
64 1 LED 01 Off
This tells the system to except the incoming calls on the PRI Span as LDN
type calls.
*
65
1 CO LEDs 001-023
On
This tells the system that there are 23 bearer channels on the first Channel
Group, and that they will appear on CO lines 001~023.
*
66-1 01 1
This tells the system that Trunk Group 01 is assigned to PRI Channel Group
1.
*
66-3
01 LEDs 01-02, 11-12
On
This tells the system that Operator Calls, Carrier Access, 1+10 Digit Dialing,
and Ring Back Tone to the outside caller are allowed.
01 LED 13 On
This tells the system when interfaced with DMS XXX to send the progress
descriptor 81 or 83.
LED 14 On When connecting to a DMS XXX with NI1 protocol.
LED 15 On
Set up message for outgoing call. When connecting to a DMS XXX. LED 11
must be Off in Program *66-3 when this LED is On.
*
66-5 1 01 XXX-XXXX
XXX-XXXX tells the system what the LDN number is that the network will be
sending for the LDN Type Call for Trunk Group 01.
*
66-6
1 01 CO LEDs
001~023 On
This tells the system to ring CO appearances 001~023 for incoming LDN
calls that match the LDN number that was entered in Program
*
66-5 for that
Trunk Group.
*
67-1 01 3 This tells the system that the PRI Span is for both-way calling.
*
67-2 01 LEDs 01~04 On
This tells the system to accept Speech, 3.1K Analog, 56K, and 64K type calls
on the ISDN PRI Span.
*
68-1 01 LEDs 011~03 On
This tells the system to accept and send Calling Party Number on ISDN PRI
Calls.
*
68-2 01 XXX-XXX-XXXX
XXX-XXX-XXXX is the number you want the system to send out on an
outbound call for Caller Number Identification.
Table 7-3 ISDN PRI DNIS Type Call Programming (continued)
Program
Number
Program Data Description