Filter
Top Products
Toll Restriction
Program 45-8~9 – Toll Restriction Override Code
4-22 Strata DK Programming 5/00
Program 45-8~9 – Toll Restriction Override Code
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: Leaves code assignments blank
Program 45-8~9 Overview
This program enables selected stations in the system to alter the override code. These stations are
defined by their users - specified in Program 30, Button/LED 09.
Two different codes can be dialed by any station user to override station-specific restrictions.
These codes will not register on SMDR.
To change the codes from selected stations:
Code 1: [PDN] +
+ code + 5HGLDO
Code 2: [PDN] + + code + 5HGLDO
Notes
● Do not use the same four-digit codes set in Program 44-1~8, Toll Restriction/Traveling Class
Override codes.
● Program 45 (8~9) overrides Program 44-1~8 if the same codes are used.
● Electronic telephone users can use the button instead of the 5HGLDO button.
● Verified Account Codes (Forced or Voluntary) can also be used to override Toll Restriction on
a call by call basis. When used for this function, the account code will register on the SMDR
report (see Programs 69 and 70).
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
SELECT = Description DATA = (1 to 4 Digits)
8 (Code 1)
9 (Code 2)
DATA = Code
Enter 1 to 4-digit code from the table below.
Press LED Button 01 to delete or leave a blank.
Press LED Button 02 to allow all digits to work.
SELECT = Item 8 or 9
Enter 8 to select Code 1.
Enter 9 to select Code 2.