Toshiba DK424I Telephone User Manual


 
Automatic Call Distribution
Program *14-2 DID, Tie, DNIS, ANI Line After Shift/Overflow Substitution Destinations
Strata DK Programming 5/00 6-17
Automatic Call Distribution
Program *14-2 Overview
Assigns a Normal Ringing or AA substitute destination for DID and/or Tie lines.
If an ACD Group is assigned to overflow (in Program 14-4 or 14-5) or route after shift service
(Program 14-6) to the DK built-in AA or to Normal Ringing assignments (code 320 or 321), these
assignments only apply to loop/ground start CO line calls. DID/Tie/DNIS/ANI line calls are
directed to the port assigned in this Program (*14-2).
This is because only loop and ground start CO lines (not Tie or DID lines) can be routed to DK AA
and/or Normal Ringing assignments.
Notes
If the assignments for an ACD Group: Overflow Queue Timer (Program 14-4), Overflow
Queue Point (Program 14-5), and/or After Shift (Program 14-6) destinations are programmed
as Normal Ringing or AA, DID/Tie/DNIS/ANI lines will be routed to the destination [DN]
assigned in this program. This is because DID/Tie/DNIS/ANI lines cannot be assigned to AA
or Normal CO line ringing.
If the destination [DN] assigned in this program is busy when one of the following occurs
(Ring No Answer, All Agents Unavailable, End of ACD Shift), the overflowing DID/Tie/
DNIS/ANI line will camp on to the [DN]. Call Forward and/or Hunt from the destination
assigned will occur if set on the destination station.
DID, DNIS, ANI, and Tie line calls in queue do not overflow to busy ACD Groups, Intercom
numbers, [PDNs], [PhDNs], or Distributed Hunt Groups; they remain in queue until the
destination becomes idle.
Call Forward No Answer will occur if set on the destination assignment. If the overflow
destination is a Strata DK Attendant Console, calls will exit queue and overflow to the
Attendant Console when the console is idle or busy.