Filter
Top Products
Strata DK Programming 5/00 3-1
System & Station
System & Station 3
This chapter gives you programming information for the Strata DK system and its stations.
Program 01 – Station Logical Port Display and/or
Change
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Station
Initialized Default: Logical port number = physical port number
Program 90, 91-1, or 91-9 initializes Program 01
Program 01 Overview
Program 01 enables you to enter a physical port to display the associated logical port. You then
have the option to assign a new logical port to the physical port. (To return ports to their initialized
settings, see Programs 90 and 91.)
Note Record port locations on Program 04 record sheet.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor [PDN] Port Range Processor [PDN] Port Range
DK14 000~009 B1CU 000~055
DK40i 000~027 B2CAU/BU 000~111
RCTUA 000~031 B3CAU/BU 000~191
RCTUBA/BB 000~079 B5CAU/BU 000~335
RCTUC/D 000~239
RCTUE/F 000~335
To Save existing Logical Port
6SNU
SELECT = Physical Port Number
The logical port number associated with
the physical port displays after the
physical port number is entered.
Enter new Logical Port
to change existing Logical Port