Filter
Top Products
Automatic Call Distribution
Program 03 – RSIU, RSSU, PIOU, PIOUS ACD/MIS Slot Assignments
6-2 Strata DK Programming 5/00
Program 03 – RSIU, RSSU, PIOU, PIOUS ACD/MIS Slot
Assignments
Initialized Default: n/a
Program 03 Overview
This program is for specifying RSIU, RSSU, PIOU, or PIOUS ACD/MIS Slot Assignments.
If MIS output is required for ACD, set Code 42 for the slot in which the RSSU, PIOU or PIOUS is
installed, or Code 49 if RSIU is installed in slot 11 (that connects to the SMIS personal computer).
If you use RSIU/RSIS or TSIU for MIS output, you must set the appropriate port for MIS
operation/speed using Program 76.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG
Power Off (5 sec.) then On
Enter 42 to assign the PIOU, PIOUS, or RSSU
TTY Port as MIS port, or enter 49 to assign RSIU
to slot 11 (see Program 76 if installing RSIU).
DK40i TSIU does not require an entry in Program
03.
PIOU, PIOUS, or RSSU Slot Number (12~78)
...or RSIU Slot Number 11