Toshiba DK424I Telephone User Manual


 
Toll Restriction
Program 45-1 LCR/Toll Restriction Dial Plan
Strata DK Programming 5/00 4-15
Toll Restriction
Program 45-1 LCR/Toll Restriction Dial Plan
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: Assigns Dial Plan 7 to the system (current North American Numbering Plan)
Where:
Program 45-1 Overview
This program enables you to define a dial plan for the Toll Restriction software to recognize the
typical dialing sequence of long distance/local calls made from the systems home area code, and
to identify area and office codes. The dialing plan defines several components of a telephone
number for long distance calling
Notes
Setting the proper dialing plan in this program is also required for the Least Cost Routing
feature to function properly.
   6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
X Plan Toll Restriction/LCR Dial Plans
9 (101XXXX)+1+NXX+NXX/NXX
8 (101YXXX)+1+NXX+NXX/NXX
7 (10XXX)+1+NXX+NXX/NXX
6 For UK only.
5 0+ (0+ and universal (Codes 5 and 4) are not used in USA.)
4 Universal (0+ and universal (Codes 5 and 4) are not used in USA.)
3 (10XXX)+1+AC+NXX/NXX
2 (10XXX)+1+AC+NXX/1+NNX
1 (10XXX)+AC+NXX/1+NNX
In NXX and NNX,
X =
N =
0~9
2~9
NXX =
Office code (interchangeable with area and office codes; second digit can be
0~9)
NNX = Office code (not interchangeable; second digit cannot be 1 or 0)
AC = Area Code
1+ NNX = 1 may be dialed before office codes
10XXX = old 5-digit Carrier Access Codes
101YXXX/101XXXX = new 7-digit Carrier Access Codes
Y = 0, 5 or 6
DATA = Plan 1~9
Enter Codes 1~9 to indicate the
dial plan for the system.
SELECT = 1