Toshiba DK424I Telephone User Manual


 
Glossary
TA ~ WSIU
GL-10 Strata
TA Terminal Adapter or ISDN modem that converts PC and other types of protocol into a signal
that works with ISDN. Generally, TAs support RJ-11 voice ports and RS-232C or V.35 or
V.449 data interfaces.
T1/DS-1
See RDTU.
TCIU1 Caller IDAn optional PCB that provides the Caller ID option in the Strata DK424.
TCIU2 Caller IDAn optional PCB that provides the Caller ID option in the Strata DK40i.
TCOU Four-Circuit Loop Start CO Line Board An optional PCB providing four loop start CO line
circuits in the Strata DK40i.
TDDU Four-Circuit DID Line Digital Telephone Interface Unit An optional PCB providing four DID
line circuits in the Strata DK40i.
TE Terminal Equipment. This refers to devices using ISDN service (telephones, faxes,
computers, etc.). TE1 supports ISDN formats with S/T or U-type intefaces.
TSPI Telephony Service Provider Interface.
TSIU RS-232 PortsAn optional PCB that provides up to two RS-232 interface ports (modular
jacks) enabling the DK40i to connect to various hardware devices.
TTY Flexible RS-232 port which can be used for maintenance SMDI and MIS (ACD).
U Interface A single twisted pair of copper wire on an RJ-11 jack. The wiring is identical to POTS, with
different signaling. Only one U-interface device can be attached per line.
Universal slot Slots in a telephone KSU/cabinet that are used for a variety of optional PCBs.
WSIU Serial Interface Board (DK14)Provides two serial ports for either a Station Message Detail
Recording (SMDR) device or a maintenance terminal or modem, or Caller ID interface.
Term Definition