Filter
Top Products
System & Station
Program *79 – Door Phone to [DN] Flashing Assignments
Strata DK Programming 5/00 3-177
System & Station
Program *79 – Door Phone to [DN] Flashing
Assignments
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Station
Initialized Default: No [DNs] assigned to ring for any door phone
Program *79 Overview
This program assigns door phones to ring Directory Number buttons ([PDNs]/[SDNs] [PhDNs])
when pressed and flash the [DN]’s LED. Each door phone can be assigned to flash one [DN]’s
LED and the [DN] can be assigned to appear and ring on up to 120 telephones.
Program 79 must be used in conjunction with Program *79 to ring a telephone with a flashing
[DN], when the door phone button is pressed. See Program 77-1 for door phone control box port
assignments.
Important! To allow a door phone to flash and ring, you must assign the [DN] to flash in
Program *79 and the telephone on which it appears must be assigned to ring in
Program 79.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG
Processor Type Port Range [PhDN] Port Range Processor Type Port Range [PhDN] Port Range
DK14 000~009 500~509 B1CU 000~055 500~579
DK40i 000~027 500~527 B2CAU/BU 000~111 500~739
RCTUA 000~031 500~531 B3CAU/BU 000~191 500~739
RCTUBA/BB 000~079 500~579 B5CAU/BU 000~335 500~835
RCTUC/D 000~239 500~739
RCTUE/F 000~335 500~835
Door Phone Number/Location
Door Phone Box
Number
Door Box Circuit
Number
[DN] Port Reference
Number
1
1
1
22
33
4
2
1
52
63
7
3
1
82
93
10
4
1
11 2
12 3
Enter a [DN] Port Reference
(Port Number of the [DN] that should flash when the door phone
button is pressed.) [DN] = [PDN] or [PhDN] port (see Legend
below)
Door Box Number (1~4)
Door Box Circuit Number (1~3)