Filter
Top Products
System & Station
Program 30 – Station Class of Service
Strata DK Programming 5/00 3-81
System & Station
6. LED buttons 01~20
LED buttons 01~20 activate features for each station port or port
range. Make the following selections by turning the appropriate button
LED On or Off for each item (01~20) for each port, as marked on the
system record sheet:
LED 01: Speakerphone Enabled
LED 02: Microphone Key Lock Enabled
LED 03: Microphone On at Start of Call
LED 04: Not Used
LED 05: Speed Dial Allowed
LED 06: Automatic Busy Redial Access Enabled
LED 07: Automatic Off-hook Call Announce
LED 08: Forced Account Code Enabled
LED 09: Toll Restriction Override Code Revision Authority
LED 10: DISA Security Code Change Allowed
LED 11: Dial Pulse (DTMF Off) for Standard Telephone
LED 14: Account Codes Verified
LED 15: Verified Account Code Revision Authority
LED 16: Traveling Class of Service Code Revision Authority
LED 17: Do Not Disturb Override Allowed
LED 18: Executive Override Allowed
LED 19: Privacy Override Allowed
LED 20: Not Used
If programming a port range, the LED indications are as follows:
♦ LED-On, all ports in range are enabled for that item.
♦ LED-Off, all ports in range are disabled for that item.
♦ LED-FLASHING, some ports in range are enabled and some
ports are disabled.
7. +ROG
Secure data in system programming.
30 Select
Data Programmed
8. 6SNU6SHDNHU
Prepare system for another selection (go back to Step 5), or exit
Program 30 (continue with Step 9).
30 Select =
9. +ROG
Secure Program 30 data in system memory.
30 Select = ##
Data Programmed
10. 6SNU6SHDNHU
Exit Program 30. Enter another program number or exit programming
mode (go to Step 11). Speaker beeps to indicate it is exiting Program
33.
Program =
11. +ROG
Exit programming mode.
No. N-N
Jan 20 Sun 06:58
1. N-N = Programming telephone [PDN]
Action (press buttons + LED buttons) LCD Response