Filter
Top Products
System & Station
Program 39 – Flexible Button Assignments
3-122 Strata DK Programming 5/00
Alert Signal Button Assignments
The Alert Signal is four short bursts of tone, sent two times/three seconds apart from one partner
station when the other partner station when one of the partners presses the
$OHUW6LJQDObutton on
their telephone. An Alert Signal can be sent to stations that are idle or busy, or in Call Forward or
Do Not Disturb mode. No talk path will exist before or after the Alert Signal is activated.
Important!
● Both partner stations must have the same Alert Signal button number programmed in Program
39 and the appropriate Speed Dial Number programmed to allow the Alert Signal buttons to
operate.
● Strata AirLink does not support this feature.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Station Number: _______
Alert Signal Button
Button Number (01~20) Speed Dial Number
Alert Signal Button Partner Station
Number
No. Code
1 427
2 428
3 429
4 430
Station Number: _______
Alert Signal Button
Button Number (01~20) Speed Dial Number
Alert Signal Button Partner Station
Number
No. Code
1 427
2 428
3 429
4 430
Enter the logical port number of the
telephone that will be assigned an
$OHUW6LJQDO button.
YYY = the Program 39 code for the
$OHUW
6LJQDO
button that should be installed.
Press the telephone button to which
$OHUW
6LJQDO
should be assigned.