Filter
Top Products
ISDN
ISDN
Program *43-3 – Network PRI Interface Assignment
Strata DK Programming 5/00 7-19
Program *43-3 – Network PRI Interface Assignment
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: System, PRI
Initialized Default: Blank (see Important! below)
Program *43-3 Overview
Program *43-3 assigns each PRI interface and ID code for communicating with the ISDN provider
to identify the B-channels to be used with NFAS.
Use the Record Sheet for *43-1.
Program *43-4 – PRI Explicit/Implicit Coding
Assignment
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: System, PRI
Initialized Default: LED 01 On
Program *43-4 Overview
Program *43-4 assigns each PRI interface that has D-channel control of a channel group to have
explicit or implicit coding on outgoing calls. DK RPTU accepts both explicit and implicit coding
on incoming calls. Explicit is one (1) PRI using one (1) D-channel. Implicit is multiple PRIs using
one (1) D-channel.
✱ ✱ ✱ ✱ 6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
6SNU
+ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
LED Setting
PRI Index Number
1 2 3 4 5 6 7 8
02~20 Not Used
01 On = Explicit coding for the RPTU that provides D-channel control.
Off = Implicit coding for the RPTU that provides D-channel control.
SEL = 3
Enter the PRI Index Number (1~8)
ID = Network PRI Interface Code,
supplied by public provider (0~19)
SEL = 4
Enter the PRI Index Number (1~8)
DATA = Light LEDs to assign feature