Toshiba DK424I Telephone User Manual


 
Toll Restriction
Program 45-2 Toll Restriction Disable
Strata DK Programming 5/00 4-19
Toll Restriction
Program 45-2 Toll Restriction Disable
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: All LEDs Off for all CO lines (all lines apply Toll Restriction)
Program 45-2 Overview
This program enables you to program lines be exempt from any Toll Restrictions defined in this
section. Mark the exempt lines with an X on the record sheet. Toll Restrictions disabled in this
program override Station Toll Restrictions defined in Program 48.
   6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor CO Line Range Processor CO Line Range
DK14 001~004 B1CU 001~032
DK40i 001~012 B2CAU/BU 001~120
RCTUA 001~016 B3CAU/BU 001~120
RCTUBA/BB 001~048 B5CAU/BU 001~200
RCTUC/D 001~144
RCTUE/F 001~200
LED CO Line X LED CO Line X LED CO Line X
20 20 20
19 19 19
18 18 18
17 17 17
16 16 16
15 15 15
14 14 14
13 13 13
12 12 12
11 11 11
10 10 10
09 09 09
08 08 08
07 07 07
06 06 06
05 05 05
04 04 04
03 03 03
02 02 02
01 01 01
LEDs/Buttons
Specify CO lines by setting LED Buttons as defined by
the table below. All LEDs with an X should be lit when
finished.
On = Disable Toll Restriction
SELECT = 2
Press Scroll to advance or Page to
go back.
After programming, press:
Vol to turn all LEDs On
Vol to turn all LEDs Off