Filter
Top Products
Initialization & Test
Program 91-1 – Automatic PCB Recognition and Port Renumber
Strata DK Programming 5/00 2-7
Initialization & Test
Program 91-1 Example
Action (press buttons + LED Buttons) LCD Response
1. Use the LCD programming phone per Minimum Hardware
Requirements on Page 1-14.
No. N-N
1
Jan 20 Sun 06:43
1. N-N is the Program Telephone [DN].
2. ✱✱✱✱
Enter programming mode. (Do not press [DN] button.)
Program Mode
3. 6SNU6SHDNHU+ROG
Access Program 91. System beeps after 6SNU6SHDNHU is pressed
to indicate program number may be entered.
Program = 91
Data Store
4. 6SNU6SHDNHU
Prepare the system for a station port selection.
91 Select =
5. Press
91 Select = 1
Renumber and Reset
6. Press LED Buttons 01 and 02 (LEDs turn On)
91 Select = 1
Renumber and Reset
7. Press +ROG
The telephone will exit the programming mode and button LEDs 01
and 02 will go out after a short delay.
No. N-N
(Month Day Time)