Filter
Top Products
Toll Restriction
Program *45-5 – Overlap Area Code
4-30 Strata DK Programming 5/00
Program *45-5 – Overlap Area Code
Processor Type: DK424, all RCTUs and BCUs (Release 4.3 and higher)
Program Type: Toll Restriction and LCR
Initialized Default: blank
Program *45-5 Overview
This program enables registering Overlap Area Codes (OAC). Overlapping area codes are not
considered toll calls and do not require the caller to first dial a
. If a telephone number requires
the caller to first dial a
, do not enter that area code in this program. Up to eight OACs can be
registered.
Example: One city might have two different area codes; however, the telephone company
considers calls between these two areas to be treated as local calls. To register this information into
the DK switch, enter both area codes in this program. The OAC information is applied to ISDN
calls, which require 10 digits.
ISDN Immediate Dialing is available for dialing OAC + OC + XXXX numbers. See “Program 35
– Station Class of Service” on Page 3-100, LED 15 for more information on ISDN Immediate
Dialing.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Overlap Area Codes (8 max.)
SELECT =
DATA = (1~3 Digit Codes)
1
2
3
4
5
6
7
8
SELECT = 5
OAC = 0~9 (3 digits)
Press LED Button 01 to delete a digit.
Address (1~8)