Filter
Top Products
ISDN
ISDN
Guidelines for Programming ISDN Calling Features
Strata DK Programming 5/00 7-7
*
66-3
01 LEDs 01-02, 11-12
On
This tells the system that Operator calls, Carrier Access, 1+10 Digit Dialing,
and Ring Back Tone to the outside caller are allowed.
01 LED 13 On
This tells the system when interfaced with DMS XXX to send the Progress
Descriptor 81 or 83.
LED 14 On When connecting to a DMS XXX with NI1 protocol.
LED 15 On
Set up message for outgoing call. When connecting to a DMS XXX. LED 11
must be Off in Program *66-3 when this LED is On.
*
66-5 1 01 XXXX
This assigns the LDN/DID/DNIS number, the
*
(asterisk) can be used as a
wildcard.
*
66-6 1 01 LEDs 01~23 On This assigns the CO lines to the index.
*
67-1 01 3 This tells the system that the PRI Span is for both-way calling.
*
67-2 01 LED’s 01-04 On
This tells the system to accept Speech, 3.1K Analog, 56K, and 64K type
calls on the ISDN PRI Span.
*
68-1 01 LED’s 01-03 On
This tells the system to accept and send Calling Party Number on ISDN PRI
Calls.
*
68-2 01 XXX-XXX-XXXX
XXX-XXX-XXXX is the number you want the system to send out on an
outbound call for Caller Number Identification.
*
69-1 000-344 1 00
This tells the system to send the number entered in Program
*
68-2, as the
Calling Party Number Identification for all stations on outbound calls.
*
09 000-344 (100~444)
Enter the DID number for the station port that is to receive a call to the dialed
DID number.
Table 7-2 ISDN PRI DID Type Call Programming (continued)
Program
Number
Program Data Description