Filter
Top Products
ISDN
Program *66-1 – Channel Group Number Parameters
7-28 Strata DK Programming 5/00
Program *66-1 – Channel Group Number Parameters
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: Trunk, PRI
Initialized Default: Blank
Note Program *65 must be assigned before entering Program *66. If Program *65 changes, then
this program will be affected. Program *66 defaults back to the settings in Program *65.
Program *66-1 Overview
This program assigns PRI ISDN trunk groups to a channel group.
ISDN Trunk Groups are assigned based upon all available trunk groups in Program *16, identified
as PRI trunk groups.
This program must be entered after Program *65 or anytime a change is made to *65.
The channels assigned in *65 will be transferred into the last trunk group entered in *66-1 for that
channel group.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Trunk Groups
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CHGP = Channel Group Number (1~8)SEL = 1
Enter the ISDN
Trunk Group Number