Filter
Top Products
5.3
F
AX
5
Adjusting Document Settings
When setting typical text based documents, the default
document settings produce good results.
However, if you send documents that are of poor quality, or
contain photographs, you can adjust the following features to
ensure a higher quality.
Resolution
Resolution is a measure of the fineness of clarity of a
printout. Low resolution may cause text and graphics to have
a jagged appearance, while higher resolutions provide
smoother curves and lines, crisp text and graphics, and a
better match to traditional typeface designs.
Press
Resolution
on the front panel to increase resolution.
By pressing
Resolution
repeatedly or using the
Scroll
buttons ( or ), you can choose between STANDARD,
FINE, and SUPERFINE. Press
Enter
to save the selection.
The document types recommended for quality settings are
described below.
•
Standard
works well for normal handwritten typed, or
printed documents.
•
Fine
is good for documents containing a lot of detail.
•
Superfine
works well for documents containing extremely
fine detail. Superfine works only if the receiving machine
also has the SUPERFINE feature.
N
OTES
:
• Superfine resolution is not available to store the document.
Superfine documents will be stored to memory with Fine
mode for the advanced faxing like delayed transmission. And
for a normal fax, the pages will be sent one by one as soon as
they are scanned, even though Send From Memory is set to
ON.
• If the product is set to Superfine resolution and the receiving
fax machine does not support Superfine resolution, your
product will transmit using the highest resolution mode
supported by the remote fax machine.