Filter
Top Products
2.5
P
RINT
2
Paper Guidelines
• When loading paper, envelopes, or other special media, keep
these guidelines in mind:
• Attempting to print on damp, curled, wrinkled, or torn paper
can cause paper jams and poor print quality.
• Use only high quality inkjet or copier grade paper. Avoid paper
with embossed lettering, perforations, or texture that is too
smooth or too rough.
• Store paper in its ream wrapper until ready to use. Place
cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture, or other conditions
that can cause it to wrinkle or curl.
• During storage, moisture-proof wrap (any plastic container or
bag) should be used to prevent dust and moisture from
contaminating your paper.
• Always use paper and other media that conform with those
listed under “Paper Specification” on page 8.5.
25 sheets of
photo paper
•The glossy or coated side is facing you.
•The paper guides rest against the edge of the photo
paper.
10 transparencies •The rough sides of the transparencies are facing you.
•The paper guides rest against the edge of the
transparencies.
100 sheets of
custom size paper
•The print side is facing you.
•Your paper size fits within these dimensions:
- Width: 76 mm to 216 mm (3.0 in. to 8.5 in.)
- Length: 127 mm to 432 mm (5.0 in. to 17.0 in.)
•The paper guides rest against the edge of the paper
25 iron-on
transfers
•You follow the loading instructions on the iron-on
packaging.
•The print side (blank side) is facing you.
•The paper guides rest against the edge of the iron-on
transfers.
Load up to: And make sure: