Filter
Top Products
6.21
MAINTENANCE
6
Cleaning the Document Scanner
To keep your product working properly, occasionally clean the
white roller, ADF rubber, and the scanning glass.
NOTE:
Do not turn the power off to clean the scanner, as
documents stored in the memory will be lost.
1
Lift the front panel by grabbing the panel along the top
edge and pulling towards you.
2
Disassemble the white roller as follows:
Both ends of the white roller have plastic bushings that
are snapped shut with small tabs on them. Pull the
bushing on one end of the roller slightly inward (A),
then rotate the bushing until it reaches a slot (B). Pull
the roller upward.
Remove the other end the same way.
B
A
Bushing
B
A