Filter
Top Products
5.22
FAX
Automatic Dialling
One-Touch Dialling
One-Touch dialling lets you use any of the 10 one-touch
buttons to automatically dial a number.
Storing a Number for One-Touch Dialling
1
Press and hold one of ten one-touch buttons for more
than 2 seconds. The display shows “Txx:”, where xx
represents the selected one-touch button number.
If a number is already stored in the location you chose,
the display shows the number. To replace the number
with other phone number, select “1.RENEW”. Otherwise,
select “2.OTHER” and start over with a different one-
touch button.
2
Enter the number you want to store by using the
number keypad and then press
Enter
.
To insert a pause between numbers, press
Redial/
Pause
. ‘P’ appears on the display.
If you make a mistake while entering a number, press
Search/Delete
and re-enter the correct number.
3
To assign a name to the number, enter the desired
name. For information on how to enter names, see
“Entering Characters Using the Number Keypad” on
page 1.38.
Or,
If you do not want to assign a name, skip this step.
4
Press
Enter
when the name appears correctly or simply
without entering a name.