Samsung SF-430 Cordless Telephone User Manual


 
1.34
SETUP
Basic System Setup
Setting Date and Time
If you are setting up the product for the first time, or if the
product has not been operated for an extended period of time
in power plug off, the LCD display prompts you to set the
current date and time.
The current date and time are shown on the display when the
product is in Standby mode. The time and date are also
printed on all faxes you send.
In Standby mode, you can also access the date and time
setup menu at any time by taking the following steps:
1
Press Setup. The display shows “1.SYSTEM SETUP” on
the bottom line.
2
Press Enter. The display shows “FAX NUMBER/NAME” on
the bottom line.
3
Press the Scroll buttons ( or ) until you see “DATE/
TIME”, and then press Enter. The date currently set for
the product is displayed.
Take the following steps to enter your current date and time:
1
A flashing cursor prompts you to enter the date. Use the
number keypad to enter the correct date. You can use
the Scroll buttons ( or ) to manually move the
cursor to a digit you wish to change.
Use the Europe format D-M-Y (Day-Month-Year). You
can change the date format to the USA mode M-D-Y
(Month-Day-Year). See page 1.36.