Filter
Top Products
1.42
SETUP
Adjusting Speaker Volume
1
Press OHD/V.Req. You’ll hear a dial tone if the
telephone line is correctly connected to the Line jack.
2
Press the Scroll buttons ( or ) repeatedly until you
hear the desired loudness. The display shows the
current volume level.
3
Press OHD/V.Req to save the setting and return to
Standby mode.
Setting Dialling Mode
You can set the type of telephone system your product is
connected to. This setting may be unavailable depending on
your country.
1
Press Setup. The display shows “1.SYSTEM SETUP” on
the bottom line.
2
Press Enter.
3
Press the Scroll buttons ( or ) repeatedly until you
see “DIALLING MODE”, and press Enter.
4
Press the Scroll buttons ( or ) repeatedly to select
the desired mode.
Select “TONE” if the product is connected to a tone dial
line.
Select “PULSE” if the product is connected to a pulse dial
line.
5
Press Enter to save the selection and return to Standby
mode.