Filter
Top Products
7.7
TROUBLESHOOTING
7
LOAD DOCUMENT You have attempted to
set up a sending
operation with no
document loaded.
Load a document and try
again.
MEMORY FULL The memory is full. Either delete unnecessary
documents, or retransmit
after more memory becomes
available, or split the
transmission into more than
one operation.
MEMORY JOB
NOT ASSIGNED
You attempted to add
documents when there is
no scheduled job.
Check the display if there is
any scheduled job. The
display should indicate the
job in Standby mode (for
example, DELAY TX or SAVE
TOLL).
NO ANSWER
The remote machine has
not answered after all
the redial attempts.
Try again. Make sure the
remote machine is
operational.
NO. NOT
ASSIGNED
The one-touch or speed
dial location you tried to
use has no number
assigned to it.
Dial the number manually
with the keypad, or assign a
number.
PC NOT
AVAILABLE
Your product is not
properly connected to
your PC.
Check the cable connection
between the product and the
PC. Connect properly using a
parallel or USB cable. See
page 1.10.
POLLING ERROR
The remote fax machine
you want to poll is not
ready to respond to your
poll.
Or
When setting up to poll
another fax machine,
you have used an
incorrect poll code.
The remote operator should
know in advance that you are
polling and have their fax unit
loaded with the original
document.
Or
Enter the correct poll code.
Display Meaning Solution