Filter
Top Products
5.42
FAX
Before using the Distinctive Ring Pattern Detection option,
Distinctive Ring services must be enabled on your
telephone line by the telephone company. To setup
Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial
your fax number from outside.
Select ON to turn this mode on.
Select OFF to turn this mode off.
Select SET to setup the Distinctive Ring Pattern Detection.
The LCD displays “WAITING RING”. Call your fax number
from another telephone. When the product completes
‘learning’, the LCD displays “END DRPD SETUP”.
With the DRPD feature active, “DRPD MODE” appears in the
display and the previously set reception mode is ignored. If
you turn DRPD off, the product returns to the previously set
reception mode.
NOTES
:
• DRPD must be set up again if you re-assign your fax number,
or connect the product to another telephone line.
• After DRPD has been set up, call your fax number again to
verify that the product answers with a fax tone, then have a
call placed to a different number assigned to that same line to
be sure the call is forwarded to the extension telephone or
answering product plugged into the EXT jack.
•
ECM MODE (Error Correction Mode)
: This mode
compensates for poor line quality and ensures accurate,
error-free transmission with any other ECM-equipped
facsimile machine. If the line quality is poor, transmission
time may be increased when ECM is enabled.
Select ON to turn the Error Correction mode on.
Select OFF
to turn this Error Correction mode off.
•
AUTO JOURNAL
: A journal shows specific information
concerning transmission or reception activities, the time
and dates of up to 40 most recent transmissions or
receptions.
Select ON to print the journal automatically after every 40
transmissions or receptions.
Select OFF to print the journal manually.