Filter
Top Products
5.15
FAX
5
The current reception mode is displayed when the product is
in Standby mode.
If you seldom use the fax line for voice conversations, set
your product to receive a fax automatically by selecting FAX
mode.
NOTE:
While the product is printing a received document,
scanning for fax or copy job is not possible. After the current
print job is completed, try the job.
Loading Paper for Receiving Faxes
The instructions for loading paper in the paper input tray are
the same whether you are printing, faxing, or copying,
except that faxes can only be printed on letter-, A4-, or legal-
sized paper. See “Loading Paper” on page 1.11 for
instructions.
After loading paper for receiving faxes, set the paper size to
the size of paper you normally load in the paper bin. Your
product uses this setting when printing reports and
determining auto reduction for incoming faxes. See page
5.39 to set the paper size.
NOTE:
The FAX PAPER SIZE setting does not affect the printing
from PC. If you are loading special-sized media for your current
print job, do not change this setting. After you have finished
printing, reload the original paper for fax printing.
Current
reception mode