Filter
Top Products
6.20
MAINTENANCE
Adjusting Shading
If the scanning unit becomes dirty, it can alter the shading
value. If your print has black lines or is blurred, adjust the
shading setting. Take the following steps:
1
Load a sheet of white Letter-size paper into the
document feeder.
2
Press
Setup
.
3
Press the
Scroll
buttons ( or ) until you see
“8.MAINTENANCE” on the display and then press
Enter
.
4
Press the
Scroll
buttons ( or ) until you see
“ADJUST SHADING” on the display and then press
Enter
.
NOTE:
Do not remove paper from the document feeder while
adjusting.
Setting the Product to be Checked
by Phone
The Remote Test feature allows your product to be checked
out by a service company at a remote place by phone.
1
Press
Setup
.
2
Press the
Scroll
buttons ( or ) until you see
“8.MAINTENANCE” on the display and then press
Enter
.
3
Press the
Scroll
buttons ( or ) until you see
“REMOTE TEST” on the display and then press
Enter
.
4
Press the
Scroll
buttons ( or ) to turn this feature
ON and then press
Enter
.
If you want to protect your product from being accessed
by unauthorised persons, select “OFF”.