Filter
Top Products
6.14
MAINTENANCE
10
When you have finished setting the cartridge(s) and if
any new cartridges were installed, the cartridge
alignment procedure begins automatically by printing
the Cartridge Alignment form.
Refer to step 4 under “Aligning the Print Cartridges” on
page 6.16.
If you installed an old cartridge, the product returns to
Standby mode without printing an Cartridge Alignment
form.
CAUTION:
Do not power off the product until the Cartridge
Carrier Assembly has moved back into the home position. If no
menu choices are made, the Carrier Assembly will
automatically return to the home position after about one
minute.
Replacing Print Cartridges from the
Control Program
1
Click
Start
>
Programs
>
Samsung SF-430 Series
>
Printer Control Program
. You have accessed the
Samsung SF-430 Series Control program.
2
Select the
Cartridges
tab.
3
Click
Install/Change Cartridge
from the Cartridge
tab.
The cartridge holder moves to the centre position.
4
Lift the front panel by grabbing the panel along the top
edge and open the top cover. Replace the old
cartridge(s) by following the instructions on page 6.11.