Filter
Top Products
5.33
FAX
5
5
Press the
Scroll
buttons ( or ) until you find “SEND
POLLING”, and then press
Enter
.
The display asks you to enter a 4-digit poll code. The
poll code is preset to “0000” at the factory, which
represents no poll code.
6
If you want to use a poll code, enter the desired 4-digit
code (except for “0000”) and then press
Enter
.
Or
If you do not want to secure the transmission with a poll
code, press
Enter
when the display shows “0000” for
the poll code, or enter
0000
.
7
The product stores the document in the memory. The
display counts the number of pages being stored in the
memory and the memory capacity remaining.
The product returns to Standby mode and the display
shows a reminder that “POLL TX” is set.
NOTE:
If you have previously set the receive mode to other
than FAX mode, the product automatically switches to FAX
mode (automatic receiving) when set to be polled.
Polling a Remote Machine
Your product will poll a remote fax machine and retrieve a
document, which is stored in memory and then print it.
1
Lift the handset or press
OHD/V.Req
on the front
panel, and enter the phone number of the remote fax
machine.
2
When you hear a fax tone from the remote machine,
press
Setup
.
3
When the display shows “TO RX POLL PRESS ENTER”,
Press
Enter
.
The display asks you to enter a 4-digit poll code. The
poll code is preset to “0000” at factory. 0000 represents
no code.