Samsung SF-430 Cordless Telephone User Manual


 
5.14
FAX
Receiving a Fax
About Reception Modes
Your product has four reception modes:
• In FAX mode, the product answers an incoming call and
immediately goes into receive mode.
• In AUTO mode, the product answers an incoming call
expecting to receive a fax. If the product does not sense a
fax signal, it will continue to sound the ringing tone to tell
you it is a phone call. If you do not lift the handset during
the ringing, the product will switch to automatic fax
reception mode.
• In ANS/FAX mode, an answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If your product senses a fax tone on
the line, the call automatically switches to the fax machine.
NOTE:
To use the ANS/FAX mode, attach an answering
machine to the EXT jack on the back of your product (see page
1.9).
• In TEL mode, the automatic fax reception is turned off. You
can receive a fax by picking up the handset and pressing
Start FAX Black
or
Start FAX Color
on the front panel
of your SF-430 series product.
• In DRPD mode, you can receive a call using the Distinctive
Ring Pattern Detection (DRPD) feature. “Distinctive Ring” is
a telephone company service which enables a user to use a
single telephone line to answer several different telephone
numbers. This mode is displayed when you have set up the
distinctive ring pattern. For details on this feature, see page
5.41.