Filter
Top Products
1.10
SETUP
Printer Cable
Connect the printer cable into the connector on the back of
the product. Then, connect the other end of the cable to the
corresponding port on your computer.
Use either USB cable which come with your product or IEEE-
1284 compliant parallel cable (purchased separately).
N
OTES
:
• If using a USB cable, you must be running Windows 98/Me/
2000/XP.
• Shut down your computer before connecting the cable.
• When using USB connection, your product provides two USB
modes: Fast and Slow. Fast is the default mode. Some PC
user may experience poor USB implementation in the default
mode. If this occurs, select Slow mode to achieve successful
results. For details on changing the USB mode, see page
7.14.
AC Power Cord
Plug one end of the cord into the back of the product and the
other end into a standard grounded AC power outlet.
USB cable
To
computer
Parallel cable
To AC outlet