Panasonic KX-TVS80 Telephone User Manual


 
4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX
89
For KX-TD series
a. With the phone on-hook,
Press
the
PROGRAM
button.
b. Dial
[99]
. (Display changes to PT-PGM Mode.)
2.
Press [#2]
(for KX-TA624) or
[03]
(for KX-TD series).
Screen output: Ext NO?
3.
Press
the extension number. Or press [ ] key to remove all passwords (for KX-TD series
only).
4.
Press STORE
.
5.
Exit the program mode:
For KX-TA624
Set
the
MEMORY
switch to
"Set"
.
For KX-TD series
Press
the
PROGRAM
button or lift the handset.
4.4.9 Two-Way Recording into One's Own Mailbox
This feature allows extension users to record conversations into their own mailboxes by
pressing the Two-Way Recording (TWR) button.
4.4.10 Two-Way Recording Button Assignment
For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This key must be either a DSS/BLF or CO key (must have a lamp). Follow the
procedure below to assign a TWR button on an extension. (This is a station level program and
should be done at each individual phone.)
1.
Enter Station Programming:
For KX-TA624
With the phone on-hook,
Set
the
MEMORY
switch to
"PROGRAM"
.
(Display changes to PITS-PGM Mode.)
For KX-TD series
a. With the phone on-hook,
Press
the
PROGRAM
button.
b. Dial
[99]
. (Display changes to PITS-PGM Mode.)
2.
Press
the desired
FLEXIBLE (CO or DSS/BLF)
button that you want to assign as the
TWR button.
3.
Press [90]
.
Screen output: 2WAY-REC:
4.
Enter
a Voice Mail extension number.
Screen output: 2WAY-REC: _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE
.
6.
Exit the program mode:
For KX-TA624
Set
the
MEMORY
switch to
"SET"
.