Filter
Top Products
B1 SYSTEM NAVIGATION
192
SYSTEM ADMINISTRATOR'S GUIDE
B1 SYSTEM NAVIGATION
System Administration, which includes the setting and changing of system parameters, is
performed using an RS-232C ASCII or VT terminal. This can be a personal computer with
emulation software.
Keyboard Use
Menu options are chosen by
Typing
the number of the option desired and
Pressing RETURN.
Using the Interface
Programming Guidance
Each parameter is accessed through a series of menu screens. The Programming Menu
Structure Diagram on the following page depicts this menu flow. A menu flow is shown at the
beginning of each section. The menu flow corresponds to the Programming Menu Structure
Diagram on the following pages. This flow is designed to guide the user through the
appropriate menus to the parameter to be setup or changed. The following example illustrates
how the menu flow is used.
Table 33
KEY FUNCTIONS
(1) - (9), then
(RETURN)
Typing any number 1 through 9 will select
the corresponding option for that number.
Pressing RETURN will select the number
entered.
(\)
Exits the current screen and returns to the
previous step within the menu.
Backspace
Used to correct any mis-typed entry.
Example:
System Administration Top Menu - 1 - 4 - 1 - 1
1. Press 1 at the System Administration Top Menu. Press RETURN.
2. Press 4 at the Program Menu. Press RETURN.
3. Press 1 at the Service Setting Menu. Press RETURN.
4. Press 1 on the Automated Attendant Menu to select "1. Department Dialing," when selected.
5. Press RETURN. Auto. Attn-Department Dialing Menu will be displayed on the terminal.