Filter
Top Products
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
SYSTEM ADMINISTRATOR'S GUIDE
237
Other Parameters - Message Waiting Notification
The following parameters are used to control the handling of message waiting notification
calls.
Outgoing Call
Setup
Sequence
Up to 12 digits
consisting of
0-9, , #, F, R, S, T,
W
(T)
Specifies the sequence of codes used by the VPS when
calling an outside line. Up to 12 digits can be set. The
default value is "T." "T" indicates that the system will
dial the outside phone number only after detecting a
dial tone.
Example:
9W = (9) - 1-s wait - dial outside phone number. "9" is
the CO line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
To select the Message Waiting Notification Parameter, follow the menu path as
shown:
System Administration Top Menu - 1 - 5 - 7 - 3
Table 56
Parameter Value Range
(Default)
Description/Function
Outgoing Call
Ports
Port No.
(1, 2)
Specifies the port numbers used for the Message Waiting
Notification Device feature. The VPS makes outgoing
calls using the port specified in this field. At least 1 port
must be specified.
Table 55
Parameter Value Range
(Default)
Description/Function