Filter
Top Products
B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
214
SYSTEM ADMINISTRATOR'S GUIDE
Operator's Parameters - Day Mode - Operator 1
This parameter is used to enable or disable the Operator Service. It specifies Operator 1's
extension and the treatment of the calls transferred to that extension. The assigned extension
number for Operator 1 in the Day Mode will be for the Message Manager. When Operator
service is enabled, operator-seeking calls are first transferred to Operator 1's extension.
To select Operator's Parameters, follow the menu path as shown:
System Administration Top Menu - 1 - 4 - 1 - 2
To select Operator Parameters - Day Mode - Operator 1, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 2 - 1 - 1
Table 41
Parameter Value Range
(Default)
Description/Function
Operator
Service
1. Disable
2. Enable
(Enable)
Used to turn the Operator Service feature on or off.
Note
: All no-DTMF-input calls in Automated Attendant
Service are transferred to the General Delivery Mailbox
when the Operator Service is disabled.
Operator's
Extension
1-5 digits
(0)
Used to select the extension number for Operator 1.
Note 1
: The default setting (0) cannot be used with the
Message Waiting Notification - Lamp feature. An
extension number must be assigned that is included in the
Extension Numbering Plan.
Note 2
: The extension number must be an unassigned one.
Operator's
Mailbox No.
2-5 digits
(998)
Callers to Operator 1 are prompted to leave a message in
this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.