Panasonic KX-TVS80 Telephone User Manual


 
D3 SETTING UP MESSAGE WAITING NOTIFICATION
280
MESSAGE MANAGER'S GUIDE
[3] Not Use (disabled whole day)
Assigning Notification Numbers
Up to 3 telephone or beeper numbers can be set for message notification. The 0 to 9 keys, the
tone/pulse switch, and the beeper Callback Number Display Entry Code [X] are used to make
these assignments.
When the Beeper Callback No. Entry Code is added at the end of a beeper number, the
notification is made in a little different way. The VPS will ask the caller to enter the number to
be called and will display this number on the beeper. The setting of the Callback Number Entry
can be set to before the message, after the message, or with no message depending on System
Programming.
It is also possible to have the caller select whether or not enter a callback number. The System
Manager must authorize the use of the Beeper Callback No. Entry Code.
1.
Log in
the Main Menu.
2.
Press [2]
to set Message Waiting Notification
3.
Press [3]
to Assign Telephone Number.
4.
Press [1]
to change the first telephone number,
[2]
to change the second telephone number,
or
[3]
to change the third telephone number.
5.
Press [1]
to set the telephone number.
6.
Type
the
telephone number
.
7.
Press [2]
to accept the entry.
[1] Change the telephone number
[2] Accept
[3] Review
[4] Add more digits
[5] Insert a pause
[6] Set dial mode
[7] Insert a wait for dial tone
[8] Insert a beeper display command
8.
Press [1]
to be notified by telephone or
[2]
by a beeper.