Filter
Top Products
C5 CHECKING SYSTEM USAGE (SYSTEM REPORTS)
SYSTEM MANAGER'S GUIDE
269
C5 CHECKING SYSTEM USAGE (SYSTEM
REPORTS)
Eight System Reports can be generated to help monitor the VPS operating status. The reports
are sent from the RS-232C port to either a printer or a terminal. The System Administrator is
also able to output System Reports.
Obtaining System Reports
1.
Log in
the Main Menu.
2.
Press [5]
for the System Report Menu.
3.
Press [1], [2], [3], [4], [5], [6], [7], or [8]
to obtain the desired report.
•
[1] System Service Report
•
[2] Flash Memory Usage Report
•
[3] Port Usage Report
•
[4] Mailbox Usage Report
•
[5] Mailbox Parameter Report
•
[6] Call Account Report
•
[7] Class of Service Parameter Report
•
[8] Fax Call Report
Note
The Mailbox Parameter Report is displayed as "Mailbox Assignments." The Class of
Service Parameter Report is displayed as "COS Assignments."
4.
For Flash Memory Usage Report, Port Usage Report, Mailbox Usage Report or Fax Call
Report,
Press [1]
. To generate the Mailbox Usage Report, go to Step 5.
5.
Mailbox Usage Report -
Type
the
mailbox number
of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-digit
mailbox numbers), reports for all mailboxes will be printed and the System Report
Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1]
to specify the mailbox range and
Type
the mailbox number of the end of the range
or
Press [2]
to obtain all mailbox usage counts. This mailbox number is the end of the
mailbox range. The mailbox number entered in Step 5 is the start of the range. For example,