Filter
Top Products
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
228
SYSTEM ADMINISTRATOR'S GUIDE
B6.2 Day Service
Day Service is a timer function that selects the desired call handling method based upon time
of day. Port Assignment and Operator Parameters can be programmed for day and night mode.
B6.3 Holiday Setting
A special service mode can be programmed for up to 20 holidays. When a day is set as a
holiday, settings in this parameter have priority over settings for Port Service and Caller ID Call
Routing.
To provide a special message to callers on a holiday (for example,
"Today is New Year's Day
and our office is closed. If you wish to record a message, please press 1 now."
), you can create
a Custom Service menu. Use this setting to direct calls to this Custom Service on Jan. 1st. Use
foreign languages where appropriate.
To access the proper menu for Day Service, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 2
Table 49
Parameter Value Range
(Default)
Description/Function
Mon
(Start/End)
|
Sun
(Start/End)
1-12: h
00-59: min
AM/PM: a.m./p.m.
D: Day Mode
N: Night Mode
MON-SUN
(9:00 AM - 5:00
PM)
Specifies the "Start" and "End" times of the Day Service.
Day Mode: 24 h Day mode
Night Mode: 24 h Night mode
To access the proper menu for Holiday Setting, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 3