Filter
Top Products
C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
266
SYSTEM MANAGER'S GUIDE
Play Personal Greeting for Caller ID
Caller ID Screening
Message Notification Status
20.
a)
The current setting is played.
Press [1]
to change the setting (enable or disable).
b)
Confirm the entry is correct and
Press [2]
to accept it.
21.
a)
The current setting is played.
Press [1]
to change the setting (enable or disable).
b)
Confirm the entry is correct and
Press [2]
to accept it.
22.
a)
The current setting is played.
Press [1]
to change the setting (enable or disable). If the
Message Notification Status is enabled, go to Step 22 b) below.
b)
Press [1], [2], [3], [4], or [5]
to choose the desired Beeper Callback Number Entry
Mode.
•
[1] Caller Select Mode
•
[2] Without message mode
•
[3] Before message recording mode
•
[4] After message recording mode
•
[5] Disable All Entry Mode (Caller cannot access beeper)
c)
Confirm the entry is correct and
Press [6]
to accept it.
d)
The current setting of MWL Notification for Unreceived Message is played.
Press [1]
to change the setting (enable or disable).
e)
Confirm the entry is correct and
Press [2]
to accept it.
f)
The current setting of Device Notification for Unreceived Message is played.
Press [1]
to change the setting (enable or disable).
g)
Confirm the entry is correct and
Press [2]
to accept it.