Filter
Top Products
7.1 INITIALIZING THE SYSTEM
132
SYSTEM MAINTENANCE AND TROUBLESHOOTING
7.1 INITIALIZING THE SYSTEM
Initializing the system clears all voice data except user prompts and returns all system
parameters to the default setting. Throughout this section, menu selections are indicated as
"System Administration Top Menu - (Selection Number)."
This means that the System
Administration Top Menu must first be accessed. On the first menu displayed, make the menu
selection corresponding to the first menu displayed. Repeat this process for each subsequent
menu when additional selection numbers are listed.
1.
Go to the System Administration Top Menu
2.
Type [4]
for System Initialization.
3.
Type [Y]
(this places the VPS in the off-line mode).
4.
Type [Y]
to start the system resetting.
To initialize the system, follow the menu path as shown:
System Administration Top Menu - 4
1 : Program
2 : System Reports
3 : Utility Command
4 : System Reset/Clear
5 :Quick Setup (VT100 Mode Only)
Enter the number: =
System Reset/Clear Menu
1. Mailbox No. Length [3]
2. System Manager's Mailbox No. [999]
3. Message Manager's Mailbox No. [998]
Will you change the settings ? (Y/N): =
System Reset/Clear Menu
1. Mailbox No. Length [3] (2 - 5) : =
2. System Manager's Mailbox No. [999] : =
3. Message Manager's Mailbox No. [998] : =
Are these parameters acceptable ? (Y/N) : =
System Initializing
•
•
•