Filter
Top Products
5.2 PORT SETTING OPTIONS
106
CUSTOMIZING THE SYSTEM
Enter data into the Custom Service menu; use the table below as a guide.
Table 20
Description Value Range
(Default)
Description/Function
Prompt Mode 1. System
2. User 1
3. User 2
(System)
Specifies the language that the caller will hear when
calling this Custom Service.
Menu Repeat
Cycle
1-3 Times
(3)
Specifies the number of times the Custom Service
menu is repeated before the No DTMF Input entry is
used.
Call Transfer
Any Time
Extn./Mbx/No
(Extn.)
Specifies where a caller is transferred when dialing an
extension or mailbox number during the menu. If this
entry is set to "Extn.", the caller is transferred to the
corresponding extension. If it is set to "Mbx", the caller
is sent directly to the corresponding mailbox. If it is set
to "No", extension transfer and mailbox transfer are
disabled; only 1-digit entries work (following the
Custom Service menu).
Wait for
Second Digit
1-5 s
(1)
Used when the first digit of an extension is also a menu
choice within the Custom Service. If a second digit is
not dialed within this time, the menu choice is used.
No DTMF
Input
Operation
a.-f.
(c.)
This is used when a caller does not dial anything when
hearing the menu (usually rotary callers).
Keypad
Assignment
a.-n.
( =d, 0=c,
others=None)
This entry specifies the actions that is performed when
a keypad digit is dialed. Callers can access these
services by pressing the keys on their telephones.